GERMAN AMATEUR RADIO STATIONBERLIN / JO62PM / DMR-ID 2621039 / TETRA-ID 2636912
DL7OLG – Amateur radio Berlin
← HomeTETRA · TMO · VERSION 0.5.9

DL7OLG TMO Web Interface

Control your own TMO cell from a browser: Raspberry Pi and SXceiver download, free Basic edition, Pro for €25 and two interactive demos.

Control your TMO cell with Raspberry Pi, SXceiver and BlueStation directly from a browser. Basic covers everyday radio operation; Pro adds more controls and diagnostics.

Both demos are clearly labelled and use example data. No hardware or account is required. The Pro demo also includes optional Si570 frequency control with simulated drift, readings and an on/off switch. On a real station, the Si570 connection requires additional hardware and separate configuration in Pro.

Hardware: Profiles for SXceiver 1.0, 1.1 and 1.2 with a nominal 38.4 MHz clock are included. I also operate a working clone. This does not mean that every clone has been tested: an EEPROM identifier and detected interfaces establish neither the actual clock nor RF operation. Different GPIO assignments, 32 MHz clocks, amplifiers or filters require individual checks. Run python3 scripts/detect-hardware.py to generate your hardware report without transmitting.

Download web interface 0.5.9

One ARM64 package for Basic and Pro. Your signed device licence determines the available features. New in 0.5.9: the calculated Si570 reference frequency is also displayed during acquisition and marked provisional. Automatic correction still waits for current windows that meet the quality requirements. The startup fixes from 0.5.8, the saved control setting and adaptive correction below 0.5 ppm are retained.

Version 0.5.9 · 17 November 2026 · 15.8 MiB · SHA-256 checksum

Version 0.5 fixes registration of all network talkgroups after startup and reconnection, in both editions. The complete installer also updates the necessary BlueStation extension.

The previous 0.4.0 release remains in the archive. It does not include this fix. Use 0.5.9 for new installations and updates.

Basic or Pro?

BASIC

Free

Set up and operate your own TMO cell.

Try Basic →
PRO

€25.00 once

Additional features for up to three of your own registered Pis. No subscription; works offline indefinitely after activation.

Buy Pro →
Feature Basic Pro
Start/stop the cell, uptime and automatic startup ✓ ✓
Frequencies, power, TX calibration and network parameters ✓ ✓
TetraPack / BrandMeister, talkgroups and local groups ✓ ✓
Switch between local and network operation ✓ ✓
Delete saved talkgroups with confirmation ✓ ✓
Automatic allocation of voice slots TS2–TS4 ✓ ✓
Registered radios, groups, timestamps, current calls, events and hardware status ✓ ✓
Back up, download and restore configuration ✓ ✓
Web panel updates with signature verification ✓ ✓
Manage Wi-Fi networks and power saving — ✓
Preferred slot per talkgroup with fallback to a free slot — ✓
Redirect GPS destination addresses — ✓
Detailed CRC history and receive diagnostics — ✓
Audio/transport errors and a sanitised diagnostics package — ✓
Listen in the browser¹ — ✓
Virtual radio with destination ID, TG list and text messages — ✓
Transmit using the browser microphone² — ✓
Outgoing network private calls with automatic reception — ✓

¹ The complete installer builds the required voice decoder directly from its project sources. The Pro demo plays a test tone. ² Browser transmission requires HTTPS and browser microphone permission.

Basic can use Wi-Fi already configured on the Pi; setup is done through the operating system. Installation defaults new Wi-Fi connections to power saving off, while preserving explicitly saved settings. Normal cell transmission is included in Basic. With the supplied defaults, local TGs 1–90, including 90, are not forwarded to BrandMeister.

Local operation and registered radios

Under TetraPack → Network operation, choose network operation via TetraPack / BrandMeister or a purely local cell. Changes take effect at the next cell startup. In local mode, all talkgroups stay within the cell; saved credentials remain available for later network use. The participant list shows radios registered in BlueStation, their groups, registration time and last update. Search by ID or TG. Registration is not a continuous reachability check.

Transmit from your browser

Choose a destination, hold the transmit button and speak into the microphone. The virtual radio works on a computer or phone. You need a Raspberry Pi with SXceiver; a separate handheld is not needed for input. Voice supports group calls and outgoing private calls via TetraPack/BrandMeister. Private calls automatically enable reception and keep the connection open for the reply after you release the button. “End private call” hangs up. Text messages address a participant ID. Local voice private calls and unsolicited incoming private calls are not yet supported. A trusted HTTPS connection and microphone permission are required.

Supported setup

Requirement Details
Hardware Raspberry Pi with a suitable SXceiver/SX1255 profile
Operating system 64-bit Raspberry Pi OS / Debian 13
Radio software BlueStation & SoapySX with the included patches
Use Personal, non-commercial; Basic is free, Pro optional

My station uses a Raspberry Pi 4 with 1 GB RAM. The complete installer sets up an existing 64-bit Raspberry Pi OS 13 system. Building requires at least 4 GiB free storage and 1.2 GiB available memory including swap/ZRAM. The Si570 option is not installed automatically and requires a hardware modification with level adaptation.

The extensions run at my station. Installation, update validation and licensing have automated checks. A complete fresh installation on another Pi and the first real upgrade using the new web update function are still pending. See the installation guide.

Activate your Pi

  1. Install: Download and extract the package, then run sudo python3 scripts/install-all.py. Follow the installation guide. The interface is available on your local network at https://PI-IP-ADDRESS:8443/.
  2. Identify the device: On the Pi’s activation page, enter your base callsign, email address and personal seven-digit RadioID.net ID. The Pi supplies its device identifier.
  3. Register: Enter the details in the registration portal or upload the Pi’s activation file. Confirm the link sent by email.
  4. Import the licence: Download the issued licence and import it on the Pi. Your hotspot ID is fixed to your assigned suffix 01, 02 or 03. Then enter your own network password and radio settings.

Up to three Pis per base callsign and personal Radio ID are activated automatically. Additional devices or a replacement Pi are available on request. A new SD card in the same Pi does not use another device slot.

The Basic licence is perpetual and verified offline on the Pi. A purely local cell therefore needs no recurring licence-server connection. A RadioID.net ID is still mandatory for registration.

Use and documentation

This edition’s web interface is licensed for personal, non-commercial use. Distribution with hardware or as part of a commercial offer requires a separate agreement. The respective licences of BlueStation, SoapySX and the included patch sources continue to apply. Earlier GPL editions retain their existing rights.

Updating an older release

Basic remains free. Existing Pro users can download and import an updated licence; the virtual radio requires the new signed feature flag. No further purchase or device slot is needed. Stop the cell before importing.

A web panel update from 0.5.5 to 0.5.9 is supported. From 0.5.4 or earlier, use the complete installer so that the hardware check before every radio startup is installed too. Back up your settings first. Updating only the web panel is insufficient for that upgrade.

Compatible later updates can be checked and installed under Advanced → Update web panel. Stop the cell first. Signed packages are verified and the previous release is backed up; settings and the licence are preserved. If new radio software is needed, the panel directs you to the complete installer. Saved Pro settings remain stored but inactive in Basic. The public installer does not replace the separate private Si570 installation.

Previous release 0.4.0 · Archive 0.3.0